Install a Fender Flare For Mitsubishi Pajero

Install a Fender Flare For Mitsubishi Pajero

In the article below, I will discuss how to install a fender flare for Mitsubishi Pajero. This is an option for owners who want to have an easy way to cover up a rear end that is not up to their standard.

There are three types of fender flares available for Mitsubishi Pajero. The first type is the basic kind. This is what I would recommend to new car owners that just want to increase the curb appeal of their vehicle.

The second type is the Extreme Fender Flares. This has a unique and a purpose that can be used for different purposes.

The third and final type is the Chemical Fiber Fender Flares. This is a very well known choice for any car owner that wants to make a difference in their vehicle. This will make sure that the car looks as good as it feels.

As soon as you are ready to install the flare, you will need to remove your original bumper and the factory bumper. Take out the truck bed and everything that are still attached. These are all things that will be covered up by the flare. After you have everything out of the way, drill pilot holes and attach the flare to the top of the truck bed.

To attach the flare to the rear fender rails, you will need to drill holes in the rails and then insert the bolts. Make sure that you do not have any tension on the bolts as this could lead to damage to the metal rails.

When you install new fender flares, they should fit snugly to the body of your vehicle. If they don't fit snugly, just take them off and re-use them.

Install them on your vehicle and enjoy the added curb appeal. When you are installing the flares, make sure that you read the installation manual. You will need to follow the instructions in the manual very carefully so that you can install the flares properly.

Tags:mux fender flare | amarok fender flare | bt50 fender flare